Compression Latch (small version) Page 1 - 045 Compression latch with 4.5 mm clamping grip. • RH or LH application. • Vibration proof. • The closing action is always clockwise. • By rotating the insert 90º the cam is at first put into closed position. • By rotating a further 115º, the cam will be pulled towards the frame. • In the final position, closed and compressed. • The H-dimension can be easily adjusted by the adjusting screw. • Water- and dust-tight according to IP65 EN 60529. • A pre-assembled Quarter-Turn can be installed in the cutout. Material: • Housing: zinc die, black coated • Insert shaft: zinc die, black coated • Knob: PA, black • Cam: zinc die, black coated • Adjusting screw: steel, Zinc plated D 06/06/02 A 1/15/03 a) Compression Latch (as drawn) complete 220-9313 with flat seal, nut and knob a 1 ) slotted insert 4mm deep 220-9317 a 2 ) socket hexagon (Allen) insert 4mm (5/32) 220-9318 © copyright by DIRAK / Germany 1